基于IMU/FADS/无线电的火星上升器组合导航方案

以火星采样返回任务中火星表面上升为背景，研究了基于惯性测量单元（Inertial Measurement Unit, IMU）、嵌入式大气数据传感系统（Flush Air Data Sensing System, FADS）和无线电信标的组合导航方法。首先，在传统的IMU导航框架中加入由无线电测量获得的相对距离、速度信息，以及由FADS获取的动压、温度数据，建立了基于IMU、无线电和FADS的导航观测模型；然后，基于无迹卡尔曼滤波（Unscented Kalman Filter, UKF）技术对测量信息进行了融合，并压制了过程噪声和测量噪声，从而对上升器的状态进行了联合估计；最后，在数值仿真中，将UKF与自适应无迹卡尔曼滤波（Adaptive Unscented Kalman Filter, AUKF）技术进行了对比，在比较不同滤波器性能的同时，验证了组合导航方法的有效性。     

A review of friction stir joining of SiCp/Al composites

SiCp/Al composites have excellent comprehensive properties and have been widely used in aerospace, automotive industry and other fields. Due to the huge difference in performance between SiC particles and matrix alloys, traditional fusion welding methods are difficult to meet the join requirements of SiCp/Al composites. Friction stir joining (friction stir welding), as a solid phase joining process, has been proved to be a new technology with fine prospect in joining SiCp/Al composites compared with fusion welding process. Although some progress has been made in recent years, there are still full of challenges. In this paper, the research status of friction stir joining of SiCp/Al composites in recent years is expatiated, including the weldability of SiCp/Al composites, the macrostructure and the microstructure of joints, mechanical properties of joints, and tool wear and monitoring. Furthermore, the existing challenges of friction stir joining of SiCp/Al composites are summarized and the future development directions are prospected.     

Reconfigurable fault-tolerant control for supersonic missiles with actuator failures under actuation redundancy

Aircraft undergoing actuator failures into under-actuation have been seldom studied in literature. Aiming at addressing actuator failures of Total Loss of Effectiveness (TLOE) as well as Partial Loss of Effectiveness (PLOE) resulting in different system actuations, reconfigurable Fault-Tolerant Control (FTC) is proposed for supersonic wingless missiles under actuation redundancy. The under-actuated system of TLOE failure patterns is solved by transformation to cascade systems through a ‘shape variable’. Meanwhile, actuator TLOE faults of different unknown failure patterns from proper actuation to under-actuation are accommodated by a reconfigurable adaptive law on a multiple-model basis. The backstepping technique with the Extended State Observer (ESO) method adopted as a basic strategy is applied to an established symmetric coupled missile system with actuator PLOE faults, modeling errors, and external disturbances. Additionally, the nonlinear saturation characteristics of actuators are settled by an auxiliary system with the Nussbaum function technique. The stability of the control system is analyzed and proven through Lyapunov theory. Numerical simulations are implemented in the presences of aerodynamic uncertainties, gust disturbance, and actuator failures. Results demonstrate the effectiveness of the proposed method with satisfactory tracking performance and actuator fault tolerance capacity.     

航空公司飞机选型评估方法

市场上往往具有多款机型能够满足航空公司增加或更换退役飞机的需求,因此需要对这些机型进行产品竞争力及投资分析评估。本文从备选机型角度,提出了飞机选型的4大分析要素并根据实际运营情况分别进行了详细分解研究。应用于案例的分析和计算表明,该方法符合航空公司实际选型评估需求,对航空公司合理评估和选择机型具有较大的参考价值。     

Potential of IRNSS/NavIC L5 signals for ionospheric studies

Indian Space Research Organization (ISRO) has developed an indigenous system named Indian Regional Navigation Satellite System (IRNSS) or NavIC (Navigation with Indian Constellation), that consists of 7 satellites and transmits navigation signal in L and S bands. ISRO, for validation of the system, has installed many IGS (IRNSS/GPS/SBAS) receivers scattered over the Indian region. Using preliminary data from two geographically widely separated stations over India, this paper presents the results on studies on parameters of IRNSS signal quality and discusses how these parameters may be used to study the ionospheric behavior over the Indian region. The results show the importance and advantages of using IRNSS data for such studies.     

低温磨料气射流加工PDMS实验研究

通过自研的低温磨料气射流加工装置进行低温磨料气射流加工聚二甲基硅氧烷(polydimethylsiloxane,PDMS)实验研究,分析了加工时间、加工距离、冲蚀角度和磨料粒径对冲蚀率、孔深和孔横截面形貌的影响。结果表明:随着加工时间的增加,冲蚀率先增大后减小,在第1阶段加工过程中,孔深与加工时间大致呈线性关系,增加加工时间还可使孔底部变平整;存在一个最佳加工距离使孔深最大,当加工距离大于最大加工距离时,孔深将随着加工距离的增加而急剧下降,孔的锥度随着加工距离的增大而增大;当冲蚀角度处于30°～60°之间时,冲蚀率最大,随着冲蚀角度的增加,孔的形状逐步由椭圆形变成圆形;存在一个最佳磨料粒径,使冲蚀率和孔深达到最大;当冲蚀角度小于90°时,低温磨料气射流加工PDMS材料去除机理为塑性去除和脆性去除的结合。     

再入飞行器自适应最优姿态控制

针对再入飞行器姿态控制问题，应用自适应动态规划（ADP）理论设计了姿态控制器。将再入飞行器的姿态控制建模为非线性系统的最优控制问题，提出单网络积分型强化学习（SNIRL）算法进行求解，该算法简化了积分型强化学习（IRL）算法在迭代计算中的执行-评价双网络结构，只需要采用评价网络估计值函数就可以求得最优控制律，其收敛性得到了理论证明。基于SNIRL算法设计了自适应最优控制器，并证明了闭环系统的稳定性。通过数值仿真校验了SNIRL算法比IRL算法计算效率更高，收敛速度更快，并校验了自适应最优姿态控制器的有效性 。     

行星着陆大气进入段自适应滑模抗扰控制方法

针对行星探测器着陆过程可能存在的干扰影响着陆精度问题，提出了一种抗干扰控制方法。首先建立行星探测器着陆控制模型，利用非线性干扰观测器实现对系统外部干扰的估计；在此基础上提出一种自适应滑模控制律，使得系统状态快速收敛到平衡点附近。最后，将该方法应用于火星着陆场景进行仿真。结果表明，提出的自适应滑模控制方法能够在未知扰动存在的情况下，有效实现行星探测器安全着陆，提高着陆任务的成功率。     

用于叶片减振的压电材料分布拓扑优化

提出一种可用于实际叶盘结构的压电分支阻尼器拓扑优化方法,可以给出总质量受约束的压电材料在叶片上的最佳分布,达到尽可能大的模态阻尼比。通过理论推导说明:压电阻尼器所产生的模态阻尼比仅取决于模态机电耦合系数,且该系数只与压电材料的几何形状以及模态应力场有关。进一步结合压电本构关系,基于应力分量的线性加权给出了有限的压电材料在叶片上铺设位置“优先级”的判断指标。给出了基于叶盘结构有限元模型的压电材料拓扑优化方法,通过替换单元类型和材料参数的方式对压电材料进行布置,并给出了多模态族优化、极化方向设置、电极铺设等问题的解决方案。在一个接近真实的叶盘模型上应用了此优化方法。结果表明,仅使用质量占叶片质量10%的压电材料,就可以为多个模态提供约12%的阻尼比。      

空间太阳能电站统一调度设计及电能管理分析

针对多旋转关节空间太阳能电站(Space Solar Power Station, SSPS)，提出一种环形拓扑的电力系统架构。基于功率分层准则对SSPS电力拓扑架构进行设计，提出U1~U7共7个层级、母线电压5000V、功率等级为MW的太阳能电站电力系统。针对分层架构中多太阳电池阵子阵并联(U6层)，提出分层功率平衡统一控制策略，对MPPT控制、MPPT控制+稳定直流母线电压混合控制、MPPT算法+下垂稳定直流母线电压混合控制三种控制方法开展仿真分析。结果表明，提出的基于虚拟阻抗的下垂控制策略可以有效调节、分配功率，解决了空间发电站母线电压无法稳定的问题。